


ZDROJ offers no-compromise power supply for the eurorack modular synth system.
ZDROJ is designed with a straight focus on minimizing all external interference that might influence your whole setup.
ZDROJ circuit is completely analog with linear regulation, which causes minimal interference to the secondary side of power supply.
Primary side contains an LC filter, which removes interference from 230V AC mains.
Toroidal transformer with a metal cover is the key element to minimize electromagnetic interference.
Metal cover shields electromagnetic field around the transformer. Many electronic parts are of SMD origin .
ZDROJ is made on quality PCB with copper thickness of 70 μm, which ensures high reliability and minimal losses on PCB routes.
DIMENSIONS |
27 × 8.6 × 5 cm 2400 g |
OUTPUTS |
+12V / 1.5A -12V / 1.5A +5V / 0.7A |
OUTPUT NOISE |
max 4.8mVpp on 100% load (20MHz BW) |
INPUT VOLTAGE |
230V AC (120V on request) |
OUTPUT CONNECTORS |
2x 16 pin IDC for flat cable WAGO spring terminals |
PROTECTIONS |
Input filter Output overvoltage Output short circuit – automatic recovery Output over current – automatic recovery Thermal protection – automatic recovery All output protections are independent for each rail |
OTHER |
70µm cooper thickness on PCB LEDs indicate present and drop of output voltage Prewired IEC inlet with switch attached |